Send documentation comments to mdsfeedback-doc@cisco.com
22-277
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show port-license
show port-license
To display the licensing usage on a Cisco MDS 9124, use the show port-license command.
show port-license
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the default port activation license configuration for the Cisco MDS 9124
switch.
switch# show port-license
Available port activation licenses are 0
--------------------------------------------
Interface Port Activation License
--------------------------------------------
fc1/1 acquire
fc1/2 acquire
fc1/3 acquire
fc1/4 acquire
fc1/5 acquire
fc1/6 acquire
fc1/7 acquire
fc1/8 acquire
fc1/9 eligible
fc1/10 eligible
fc1/11 eligible
...
fc1/24 eligible
Related Commands
Release Modification
3.1(1) This command was introduced.
Command Description
port-license Makes a port eligible or ineligible to receive a license. Also used to acquire
a license for a port.
To Next Page
Loading...
Need help?
General