Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
18-37
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 18 P Commands
purge module
purge module
To delete configurations in the running configuration for nonexistent modules, use the purge module
command in EXEC mode.
purge module slot running-config
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines This command cannot be issued on a supervisor module.
Examples The following example displays the output of the purge module command issued on the module in
slot
8.
switch# purge module 8 running-config
switch#
slot Specifies the module slot number.
running-config Purges the running configuration from the specified module.
Release Modification
1.1(1) This command was introduced.