Send documentation comments to mdsfeedback-doc@cisco.com
18-38
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 18 P Commands
pwc
pwc
To view your present working context (PWC), use the pwc command in any mode.
pwc
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes All.
Command History
Usage Guidelines None.
Examples The following example shows the present working context.
switch# config t
switch(config)# islb initiator ip-address 120.10.10.2
switch(config-islb-init)# pwc
(config t) -> (islb initiator ip-address 120.10.10.2)
Related Commands
Release Modification
3.0(1) This command was introduced.
Command Description
pwd Displays the current directory location.
To Next Page
Loading...
Need help?
General