Send documentation comments to mdsfeedback-doc@cisco.com
4-111
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
configure terminal
configure terminal
To enter the configuration mode, use the configure terminal command in EXEC mode.
configure terminal
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example enters the configuration mode:
switch# configure terminal
switch(config)#
The following example enters the configuration mode using an abbreviated format of the command:
switch# config terminal
switch(config)#
Release Modification
1.0(2) This command was introduced.
To Next Page
Loading...
Need help?
General