Send documentation comments to mdsfeedback-doc@cisco.com
22-26
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show cimserver
show cimserver
To display the Common Information Models (CIM) configurations and settings, use the show cimserver
command.
show cimserver [certificateName | HttpsStatus | HttpStatus | status]
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays CIM server certificate files.
switch# show cimserver certificateName
cimserver certificate file name is servcert.pem
The following example displays the CIM server configuration.
switch# show cimserver
cimserver is enabled
cimserver Http is not enabled
cimserver Https is enabled
cimserver certificate file name is servcert.pem
The following example displays the CIM server HTTPS status.
switch# show cimserver httpsstatus
cimserver Https is enabled
The following example displays the CIM server HTTP status.
switch# show cimserver httpstatus
cimserver Http is not enabled
certificateName Displays the installed Secure Socket Layer (SSL) certificate.
HttpsStatus Displays the HTTP (non-secure) protocol settings for the CIM server.
HttpStatus Displays the HTTPS (secure) protocol for the CIM server.
status Displays the CIM server status.
Release Modification
1.3(1) This command was introduced.
To Next Page
Loading...
Need help?
General