Send documentation comments to mdsfeedback-doc@cisco.com
6-5
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug biosd
debug biosd
To configure bios_daemon debugging, use the debug biosd command in EXEC mode. To disable a
debug command, use the no form of the command or use the no debug all command to turn off all
debugging.
debug biosd all
no debug biosd all
Syntax Description
Defaults Disabled.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the system output when the debug biosd command is issued:
switch# debug biosd
Related Commands
all Enables all bios_daemon debug options.
Release Modification
2.1(1) This command was introduced.
Command Description
no debug all Disables all debugging.
To Next Page
Loading...
Need help?
General