Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
6-114
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug snmp
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the system output when the debug snmp trace command is issued:
switch# debug snmp trace
Apr 29 16:03:34 snmpd[1177]: SDWRAP message Successfully processed
Related Commands
Release Modification
1.0(2) This command was introduced.
Command Description
no debug all Disables all debugging.
show snmp Displays SNMP status and setting information.
snmp-server Configures the SNMP server information, switch location, and switch
name.
snmp-server enable
traps
Enables SNMP server notifications (informs and traps).