Send documentation comments to mdsfeedback-doc@cisco.com
4-39
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear dpvm
clear dpvm
To clear Dynamic Port VSAN Membership (DPVM) information, use the clear dpvm command.
clear dpvm {auto-learn [pwwn pwwn-id] | session}
Syntax Description
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines To use this command, DVPM must be enabled using the dpvm enable command.
Examples The following example shows how to clear a single autolearned entry.
switch# clear dpvm auto-learn pwwn 21:00:00:20:37:9c:48:e5
The following example shows how to clear all autolearn entries.
switch# clear dpvm auto-learn
The following example shows how to clear a session.
switch# clear dpvm session
Related Commands
auto-learn Clears automatically learned (autolearn) DPVM entries.
pwwn pwwn-id Specifies the pWWN ID. The format is hh:hh:hh:hh:hh:hh:hh:hh, where h
is a hexadecimal number.
session Clears the DPVM session and locks.
Release Modification
2.0(x) This command was introduced.
Command Description
dpvm enable Enables DPVM.
show dpvm Displays DPVM database information.
To Next Page
Loading...
Need help?
General