Send documentation comments to mdsfeedback-doc@cisco.com
5-40
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 5 D Commands
dpvm commit
dpvm commit
To apply the pending configuration pertaining to the dynamic port VSAN membership (DPVM) Cisco
Fabric Services (CFS) distribution session in progress in the fabric, use the dpvm commit command.
dpvm commit
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines To use this command, DPVM must be enabled using the dpvm enable command.
Examples The following example shows how to commit changes to the DPVM database.
switch# config terminal
switch(config)# dpvm commit
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
dpvm distribute Enables CFS distribution for DPVM.
dpvm enable Enables DPVM.
show dpvm Displays DPVM information.
To Next Page
Loading...
Need help?
General