Send documentation comments to mdsfeedback-doc@cisco.com
11-101
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
islb abort
islb abort
To discard a pending iSCSI Server Load Balancing (iSLB) configuration, use the islb abort command.
islb abort
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines You can use the islb abort command to discard the pending changes to the iSLB configuration and
release the fabric lock. This action has no effect on the active configuration on any switch in the fabric.
The islb abort command can be issued only by the user who started the Cisco Fabric Services (CFS)
session and only on the switch that started the CFS session.
Examples The following example discards the pending iSLB configuration distribution.
switch# config t
switch(config)# islb abort
Related Commands
Release Modification
3.0(1) This command was introduced.
Command Description
islb commit Commits the iSLB configuration distribution and releases the fabric lock.
show islb cfs-session status Displays iSLB information.
show islb pending Displays the pending configuration changes.
show islb pending-diff Displays the differences between the pending configuration and the
current configuration.
clear islb session Clears a pending iSLB configuration. This command can be issued on any
switch by a user with admin privileges.
To Next Page
Loading...
Need help?
General