Send documentation comments to mdsfeedback-doc@cisco.com
4-52
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear ip access-list counters
clear ip access-list counters
To clear IP access list counters, use the clear ip access-list counters command in EXEC mode.
clear ip access-list counters list-name
Syntax Description
Defaults None.
Command Modes EXEC.
Command History
Examples The following example clears the counters for an IP access list.
switch# clear ip access-list counters adminlist
Related Commands
list-name Specifies the IP access list name (maximum 64 characters).
Release Modification
1.1(1) This command was introduced.
Command Description
show ip access-list Displays IP access list information.
To Next Page
Loading...
Need help?
General