Send documentation comments to mdsfeedback-doc@cisco.com
4-61
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
clear ivr zone database
clear ivr zone database
To clear the Inter-VSAN Routing (IVR) zone database, use the clear ivr zone database command in
EXEC mode.
clear ivr zone database
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC.
Command History
Examples The following example clears all configured IVZ information.
switch# clear ivr zone database
Release Modification
1.3(1) This command was introduced.
To Next Page
Loading...
Need help?
General