EasyManuals Logo

Cisco mds 9124 - fabric switch User Manual

Cisco mds 9124 - fabric switch
1550 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1003 background imageLoading...
Page #1003 background image
Send documentation comments to mdsfeedback-doc@cisco.com
21-85
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 21 S Commands
system cores
system cores
To enable copying the core and log files periodically, use the system cores command in configuration
mode. To revert the switch to factory defaults, use the no form of the command.
system cores {slot0: | tftp:}
no system cores
Syntax Description
Defaults Disabled.
Command Modes Configuration mode.
Command History
Usage Guidelines Create any required directory before issuing this command. If the directory specified by this command
does not exist, the switch software logs a syslog message each time a copy cores is attempted.
Examples The following example enables periodic copying core and log files.
switch# config terminal
switch(config)# system cores slot0:coreSample
The following example disables periodic copying core and log files.
switch(config)# no system cores
Related Commands
slot0 Selects the destination file system.
tftp: Selects the destination file system.
Release Modification
1.0(2) This command was introduced.
Command Description
show system cores Displays the currently configured scheme for copying cores.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco mds 9124 - fabric switch and is the answer not in the manual?

Cisco mds 9124 - fabric switch Specifications

General IconGeneral
BrandCisco
Modelmds 9124 - fabric switch
CategorySwitch
LanguageEnglish

Related product manuals