Send documentation comments to mdsfeedback-doc@cisco.com
22-334
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show span session
The following example displays all SPAN sessions.
switch# show span session
Session 1 (inactive as no destination)
Destination is not specified
Session filter vsans are 1
Ingress (rx) sources are
fc1/5,
Egress (tx) sources are
fc1/5,
The following example displays a SPAN session mapped to an FC tunnel interface.
switch# show span session
Session 2 (active)
Destination is fc-tunnel 100
No session filters configured
Ingress (rx) sources are
fc1/5,
Egress (tx) sources are
fc1/5,
To Next Page
Loading...
