Send documentation comments to mdsfeedback-doc@cisco.com
22-137
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show install all impact
Extracting “kickstart” version from image bootflash:/vk73a.
[####################] 100% -- SUCCESS
Extracting “loader” version from image bootflash:/vk73a.
[####################] 100% -- SUCCESS
Extracting “slc” version from image bootflash:/vs73a.
[####################] 100% -- SUCCESS
Compatibility check is done:
Module bootable Impact Install-type Reason
------ -------- -------------- ------------ ------
2 yes non-disruptive none
4 yes non-disruptive none
6 yes non-disruptive none
9 yes non-disruptive none
Images will be upgraded according to following table:
Module Image Running-Version New-Version Upg-Required
------ ---------- -------------------- -------------------- ------------
2 slc 1.2(1) 1.2(1) no
2 bios v1.0.7(03/20/03) v1.0.7(03/20/03) no
4 slc 1.2(1) 1.2(1) no
4 ilce 1.2(1) 1.2(1) no
4 bios v1.0.7(03/20/03) v1.0.7(03/20/03) no
6 system 1.2(1) 1.2(1) no
6 kickstart 1.2(1) 1.2(1) no
6 bios v1.0.7(03/20/03) v1.0.7(03/20/03) no
6 loader 1.0(3a) 1.0(3a) no
9 slc 1.2(1) 1.2(1) no
9 bios v1.0.7(03/20/03) v1.0.7(03/20/03) no
The following command displays the error message that is displayed if a wrong image is provided.
switch# show install all impact system bootflash:
Compatibility check failed. Return code 0x40930003 (Invalid bootvar specified in
the input).
To Next Page
Loading...
