Send documentation comments to mdsfeedback-doc@cisco.com
23-3
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 23 T Commands
tacacs+ commit
tacacs+ commit
To apply the pending configuration pertaining to the TACACS+ Cisco Fabric Services (CFS) distribution
session in progress in the fabric, use the tacacs+ commit command in configuration mode.
tacacs+ commit
Syntax Description This command has no other arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines To use this command, TACACS+ must be enabled using the tacacs+ enable command.
Examples The following example shows how to apply a TACACS+ configuration to the switches in the fabric.
switch# config terminal
switch(config)# tacacs+ commit
Related Commands
Release Modification
2.0(x) This command was introduced.
Command Description
show tacacs+ Displays TACACS+ CFS distribution status and other details.
tacacs+ enable Enables TACACS+.
tacacs+ distribute Enables CFS distribution for TACACS+.
To Next Page
Loading...
