Send documentation comments to mdsfeedback-doc@cisco.com
6-30
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug fc-tunnel
Command History
Usage Guidelines None.
Examples The following example displays the system output when the debug fc-tunnel all command is issued:
switch# debug fc-tunnel all
Related Commands
Release Modification
1.3(2) This command was introduced.
Command Description
no debug all Disables all debugging.
show fc-tunnel Display configured FC tunnel information.
To Next Page
Loading...
Need help?
General