Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
5-18
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 5 D Commands
device-alias (IVR fcdomain database configuration submode)
device-alias (IVR fcdomain database configuration submode)
To map a device alias to a persistent FC ID for IVR, use the device-alias command in IVR fcdomain
database configuration submode. To remove the mapping for the device alias, use the no form of the
command.
device-alias device-name fc-id
no device-alias device-name
Syntax Description
Defaults None.
Command Modes IVR fcdomain database configuration submode.
Command History
Usage Guidelines Only one FC ID can be mapped to a device alias.
Examples The following example shows how to map the device alias to the persistent FC ID.
switch# config t
switch(config)# ivr fcdomain database autonomous-fabric-num 10 vsan 20
switch(config-fcdomain)# native-autonomous-fabric-num 20 native-vsan 30 domain 15
switch(config-fcdomain-fcid)# device-alias SampleName 0x123456
The following example shows how to remove the mapping between the device alias and the FC ID.
switch# config t
switch(config)# ivr fcdomain database autonomous-fabric-num 10 vsan 20
switch(config-fcdomain)# native-autonomous-fabric-num 20 native-vsan 30 domain 15
switch(config-fcdomain-fcid)# no device-alias SampleName
Related Commands
device-name Specifies the device name. Maximum length is 64 characters.
fc-id Specifies the FC ID for the device.
Release Modification
2.1(2) This command was introduced.
Command Description
ivr fcdomain database
autonomous-fabric-num
Creates IVR persistent FC IDs.
native-autonomous-fabric-num Creates an IVR persistent FC ID database entry.
show ivr fcdomain database Displays IVR fcdomain database entry information.