Send documentation comments to mdsfeedback-doc@cisco.com
11-123
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
ivr copy active-service-group user-configured-service-group
ivr copy active-service-group user-configured-service-group
To copy the active service group to the user configured service group, use the ivr copy
active-service-group user-configured-service-group command in EXEC mode.
ivr copy active-service-group user-configured-service-group
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example copies the active service group to the user defined service group.
switch# ivr copy active-service-group user-configured-service-group
Successfully copied active service group to user-configured service group database
Related Commands
Release Modification
3.0(1) This command was introduced.
Command Description
clear ivr service-group
database
Clears the IVR service group database.
show ivr service-group Displays IVR service groups.
To Next Page
Loading...
Need help?
General