Send documentation comments to mdsfeedback-doc@cisco.com
3-6
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 3 B Commands
bport
bport
To configure a B port mode on a FCIP interface, use the bport option. To disable a B port mode on a
FCIP interface, use the no form of the command.
bport
no bport
Syntax Description This command has no other arguments or keywords.
Defaults Disabled.
Command Modes Interface configuration submode.
Command History
Usage Guidelines Access this command from the switch(config-if)# submode.
Examples The following example shows how to configure a B port mode on an FCIP interface.
switch# config terminal
switch(config)# interface fcip 1
switch(config-if)# bport
Related Commands
Release Modification
1.1(1) This command was introduced.
Command Description
show interface fcip Displays an interface configuration for a specified FCIP interface.
bport-keepalive Configures B port keepalive responses.
To Next Page
Loading...
Need help?
General