Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
27-10
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 27 Z Commands
zone convert zone
Examples The following example shows the zone member type conversion.
switch# show zoneset name zs1
zoneset name zs1 vsan 1
zone name zone2 vsan 1
fcid 0x0b04d3
fcid 0x0b04cd
fcid 0x0b04ce
fcid 0x0b04d1
fcid 0x0b04d2
zone name zone1 vsan 1
fcid 0x0b04d6
fcid 0x0b04d9
switch# conf t
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# zone convert zoneset name zs1 fcid pwwn vsan 1
switch(config)# ex
switch# show zoneset name zs1
zoneset name zs1 vsan 1
zone name zone2 vsan 1
pwwn 22:00:00:0c:50:02:cf:56
pwwn 22:00:00:0c:50:02:cf:72
pwwn 22:00:00:0c:50:02:ca:b5
pwwn 22:00:00:0c:50:02:cb:43
pwwn 22:00:00:0c:50:02:cd:c0
zone name zone1 vsan 1
pwwn 22:00:00:0c:50:02:cb:0c
pwwn 22:00:00:0c:50:02:c9:a2
Related Commands Command Description
show zone Displays the zone information.
show zoneset Displays the configured zone sets.