CHAPTER
Send documentation comments to mdsfeedback-doc@cisco.com
12-1
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
12
J Commands
The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric
switches. All commands are shown here in alphabetical order regardless of command mode. See the
“Command Modes” section to determine the appropriate mode for each command. For more
information, refer to the Cisco MDS 9000 Family CLI Configuration Guide.
To Next Page
Loading...
Need help?
General