Send documentation comments to mdsfeedback-doc@cisco.com
5-32
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 5 D Commands
discover scsi-target
switch# discover scsi-target remote os windows
discovery started
The following example shows how to discover SCSI targets for the specified VSAN (1) and FCID
(0x9c03d6).
switch# discover scsi-target vsan 1 fcid 0x9c03d6
discover scsi-target vsan 1 fcid 0x9c03d6
VSAN: 1 FCID: 0x9c03d6 PWWN: 00:00:00:00:00:00:00:00
PRLI RSP: 0x01 SPARM: 0x0012...
The following example begins discovering targets from a customized list assigned to the Linux operating
system.
switch# discover scsi-target custom-list os linux
discovery started
To Next Page
Loading...
Need help?
General