Send documentation comments to mdsfeedback-doc@cisco.com
22-326
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show sme cluster
The following example displays the specific recovery officer of a cluster:
switch# show sme cluster clustername1 recovery officer
Recovery Officer 1 is set
Master Key Version is 0
Recovery Share Version is 0
Recovery Share Index is 1
Recovery Scheme is 1 out of 1
Recovery Officer Label is
Recovery share protected by a password
Key Type is master key share
Cluster is clustername1, Master Key Version is 0
Recovery Share Version is 0, Share Index is 1
Related Commands Command Description
show sme cluster Displays information about Cisco SME cluster.
clear sme Clears Cisco SME configuration.
To Next Page
Loading...
