3.6 Parts
3-57
3
Screen Editing
4. Choose the desired part and click the [Select] button.
The former [Switch] dialog is displayed again. The selected part is displayed on the screen.
Changing coordinate and size
In order to change the part location, it can be designated in the item dialog.
For the item whose size can be changed with dot size designation, such as a switch, lamp, graph, box
or circle, it is possible to change the part size in the item dialog as well.
Following example shows the case of the box.
1. Click the box part and bring up the [Box] item dialog.
Click.
To Next Page
Loading...