Send documentation comments to mdsfeedback-doc@cisco.com
22-9
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show autonomous-fabric-id database
show autonomous-fabric-id database
To display the contents of the AFID database, use the show autonomous-fabric-id database command
in EXEC mode.
show autonomous-fabric-id database
Syntax Description This command has no arguments or keywords.
Defaults None
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example shows contents of the AFID database.
switch# show autonomous-fabric-id database
SWITCH WWN Default-AFID
--------------------------------------------------------------
20:00:00:0c:91:90:3e:80 5
Total: 1 entry in default AFID table
SWITCH WWN AFID VSANS
--------------------------------------------------------------
20:00:00:0c:91:90:3e:80 10 1,2,5-8
Total: 1 entry in AFID table
Related Commands
Release Modification
2.1(1a) This command was introduced.
Command Description
autonomous-fabric-id
(IVR topology database
configuration)
Configures an autonomous fabric ID into the Inter-VSAN Routing (IVR)
topology database.
To Next Page
Loading...
Need help?
General