Send documentation comments to mdsfeedback-doc@cisco.com
22-17
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show callhome
The following example displays user-defined CLI commands for the alert groups.
switch# show callhome user-def-cmds
User configured commands for alert groups :
alert-group test user-def-cmd "show version"
Related Commands Command Description
alert-group Customizes a Call Home alert group with user-defined show
commands.
callhome Configures Call Home.
callhome test Sends a dummy test message to the configured destination(s).
To Next Page
Loading...
Need help?
General