Send documentation comments to mdsfeedback-doc@cisco.com
22-121
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show flex-attach virtual-pwwn
show flex-attach virtual-pwwn
To display the current list of virtual pWWN on a specified interface, use the show flex-attach
virtual-pwwn command.
show flex-attach virtual-pwwn
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Exec mode
Command History
Usage Guidelines None.
Examples The following example displays the current list of virtual pWWN on an interface.
switch# show flex-attach virtual-pwwn
Global auto virtual port WWN generation enabled
VIRTUAL PORT WWNS ASSIGNED TO INTERFACES
--------------------------------------------------------------------------------
-----
VSAN INTERFACE VIRTUAL-PWWN AUTO LAST-CHANGE
--------------------------------------------------------------------------------
-----
all fc1/1 20:00:00:05:30:01:71:ba TRUE Sat Mar 1 14:10:07 2008
all fc1/2 20:01:00:05:30:01:71:ba TRUE Sat Mar 1 14:10:07 2008
all fc1/19 20:12:00:05:30:01:71:ba TRUE Sat Mar 1 14:10:07 2008
all fc1/20 20:13:00:05:30:01:71:ba TRUE Sat Mar 1 14:10:07 2008
all fc1/21 20:14:00:05:30:01:71:ba TRUE Sat Mar 1 14:10:07 2008
all fc1/22 20:15:00:05:30:01:71:ba TRUE Sat Mar 1 14:10:07 2008
all fc1/23 20:16:00:05:30:01:71:ba TRUE Sat Mar 1 14:10:07 2008
all fc1/24 20:17:00:05:30:01:71:ba TRUE Sat Mar 1 14:10:07 2008
Number of virtual pwwn assigned to local interfaces = 24
VIRTUAL PORT WWNS ASSIGNED TO PHYSICAL PORT WWNs
Release Modification
3.3(1a) This command was introduced.
To Next Page
Loading...
Need help?
General