Send documentation comments to mdsfeedback-doc@cisco.com
22-223
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show ivr virtual-fcdomain-add-status2
show ivr virtual-fcdomain-add-status2
To display the RDI (Request Domain ID) mode in a specific AFID and VSAN for all IVR-enabled
switches, use the show ivr virtual-fcdomain-add-status2 command.
show ivr virtual-fcdomain-add-status2
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Exec mode
Command History
Usage Guidelines None.
Examples The following example displays the RDI mode in the local switch.
switch# show ivr virtual-fcdomain-add-status2
IVR virtual domains are added to fcdomain list in VSANS: 2 for afid 1
Related Commands
Release Modification
3.3(1a) This command was introduced.
Command Description
ivr
virtual-fcdomain-add2
Configures the RDI mode in a specific AFID and VSAN for all IVR-enabled
switches.
To Next Page
Loading...
Need help?
General