Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
22-234
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show logging
local6 3 3
local7 3 3
fspf 3 3
fcdomain 2 2
module 5 5
zone 2 2
vni 2 2
ipconf 2 2
ipfc 2 2
xbar 3 3
fcns 2 2
fcs 2 2
acl 2 2
tlport 2 2
port 5 5
port_channel 5 5
fcmpls 0 0
wwn 3 3
fcc 2 2
qos 3 3
vrrp_cfg 2 2
fcfwd 0 0
ntp 2 2
platform 5 5
vrrp_eng 2 2
callhome 2 2
mcast 2 2
rscn 2 2
securityd 2 2
vhbad 2 2
rib 2 2
vshd 5 5
0(emergencies) 1(alerts) 2(critical)
3(errors) 4(warnings) 5(notifications)
6(information) 7(debugging)
The following example displays last few lines of a log file.
switch# show logging last 2
Nov 8 16:48:04 excal-113 %LOG_VSHD-5-VSHD_SYSLOG_CONFIG_I: Configuring console
from pts/1 (171.71.58.56)
Nov 8 17:44:09 excal-113 %LOG_VSHD-5-VSHD_SYSLOG_CONFIG_I: Configuring console
from pts/0 (171.71.58.72)
The following example displays switching module logging status.
switch# show logging module
Logging linecard: enabled (Severity: debugging)
The following example displays monitor logging status.
switch# show logging monitor
Logging monitor: enabled (Severity: information)
The following example displays server information.
switch# show logging server
Logging server: enabled
{172.22.95.167}
server severity: debugging
server facility: local7
{172.22.92.58}
server severity: debugging
server facility: local7