Send documentation comments to mdsfeedback-doc@cisco.com
2-14
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 2 A Commands
alert-group
The following example removes a user-defined command, called show license usage, for an alert group
license.
switch(config-callhome)# no alert-group license user-def-cmd "show license usage"
Related Commands Command Description
callhome Configures the Call Home function.
callhome test Sends a dummy test message to the configured destination(s).
show callhome Displays configured Call Home information.
To Next Page
Loading...
Need help?
General