Send documentation comments to mdsfeedback-doc@cisco.com
22-315
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show scsi-flow
show scsi-flow
To display SCSI flow information, use the show scsi-flow command.
show scsi-flow [flow-id flow-id]| statistics [flow-id flow-id {lun lun-number}]]
Syntax Description
Defaults None
Command Modes EXEC mode.
Command History
Examples The following example displays SCSI flow services configuration for all SCSI flow identifiers.
switch# show scsi-flow
Flow Id: 3
Initiator VSAN: 101
Initiator WWN: 21:00:00:e0:8b:05:76:28
Target VSAN: 102
Target WWN: 21:00:00:20:37:38:7f:7d
Target LUN: ALL LUNs
Flow Verification Status:
-------------------------
Initiator Verification Status: success
Target Verification Status: success
Initiator Linecard Status: success
Target Linecard Status: success
Feature Status:
---------------
Write-Acceleration enabled
Write-Acceleration Buffers: 1024
Configuration Status: success
Statistics enabled
Configuration Status: success
Flow Id: 4
Initiator VSAN: 101
Initiator WWN: 21:00:00:e0:8b:05:76:28
Target VSAN: 102
Target WWN: 21:00:00:20:37:38:a7:89
Target LUN: ALL LUNs
Flow Verification Status:
-------------------------
Initiator Verification Status: success
Target Verification Status: success
flow-id flow-id Displays a specific SCSI flow index.
statistics Displays the statistics for the SCSI flow.
lun lun-number Displays statics for a specific LUN number.
Release Modification
2.0(2) This command was introduced.
To Next Page
Loading...
Need help?
General