EasyManuals Logo

Cisco mds 9124 - fabric switch User Manual

Cisco mds 9124 - fabric switch
1550 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #1397 background imageLoading...
Page #1397 background image
Send documentation comments to mdsfeedback-doc@cisco.com
22-365
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 22 Show Commands
show tech-support
VSAN 4093: name:VSAN4093, state:active, interop mode:default
domain id:0x77(119), WWN:2f:fd:00:05:30:00:84:9f [Principal]
active-zone:<NONE>, default-zone:deny
-------------------------------------------------------------------------------
Interface Vsan Admin Admin Status FCOT Oper Oper Port
Mode Trunk Mode Speed Channel
Mode (Gbps)
-------------------------------------------------------------------------------
fc1/1 1 auto on fcotAbsent -- -- --
fc1/2 1 auto on fcotAbsent -- -- --
fc1/3 1 auto on fcotAbsent -- -- --
fc1/4 1 auto on fcotAbsent -- -- --
fc1/5 1 auto on notConnected swl -- --
fc1/6 1 auto on fcotAbsent -- -- --
fc1/7 1 auto on fcotAbsent -- -- --
fc1/8 1 auto on fcotAbsent -- -- --
fc1/9 1 auto on fcotAbsent -- -- --
fc1/10 1 auto on fcotAbsent -- -- --
fc1/11 1 auto on fcotAbsent -- -- --
fc1/12 1 auto on fcotAbsent -- -- --
fc1/13 1 auto on fcotAbsent -- -- --
fc1/14 1 auto on fcotAbsent -- -- --
fc1/15 1 auto on fcotAbsent -- -- --
fc1/16 1 auto on fcotAbsent -- -- --
-------------------------------------------------------------------------------
Interface Status Speed
(Gbps)
-------------------------------------------------------------------------------
sup-fc0 up 1
-------------------------------------------------------------------------------
Interface Status IP Address Speed MTU
-------------------------------------------------------------------------------
mgmt0 up 10.76.100.164/24 100 Mbps 1500
Power Supply:
-----------------------------------------------------
PS Model Power Power Status
(Watts) (Amp @42V)
-----------------------------------------------------
1 WS-CAC-950W 919.38 21.89 ok
2 -- -- absent
Mod Model Power Power Power Power Status
Requested Requested Allocated Allocated
(Watts) (Amp @42V) (Watts) (Amp @42V)
--- ------------------- ------- ---------- --------- ---------- ----------
1 DS-X9216-K9-SUP 220.08 5.24 220.08 5.24 powered-up
2 DS-X9032 199.92 4.76 199.92 4.76 powered-up
Power Usage Summary:
--------------------
Power Supply redundancy mode: redundant
Total Power Capacity 919.38 W
Power reserved for Supervisor(s)[-] 220.08 W
Power reserved for Fan Module(s)[-] 47.88 W
Power currently used by Modules[-] 199.92 W

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco mds 9124 - fabric switch and is the answer not in the manual?

Cisco mds 9124 - fabric switch Specifications

General IconGeneral
BrandCisco
Modelmds 9124 - fabric switch
CategorySwitch
LanguageEnglish

Related product manuals