Send documentation comments to mdsfeedback-doc@cisco.com
27-26
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 27 Z Commands
zoneset (EXEC mode)
The zoneset distribute vsan vsan-id command is supported in interop 2 and interop 3 modes—not in
interop 1 mode.
Examples The following example imports the zone set database from the adjacent switch connected through the
VSAN 2 interface.
switch# zoneset import interface fc1/3 vsan 2
The following example exports the zone set database to the adjacent switch connected through VSAN 5.
switch# zoneset export vsan 5
The following example distributes the zone set in VSAN 333.
switch# zoneset distribute vsan 333
Zoneset distribution initiated. check zone status
Related Commands Command Description
show zone status vsan Displays the distribution status for the specified VSAN.
show zoneset Displays zone set information.
To Previous Page
Loading...
Need help?
General