Send documentation comments to mdsfeedback-doc@cisco.com
4-19
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
cfs region
The following example shows how to remove an application assigned to a region.
switch# cfs region 1
switch# config
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# cfs region 1
switch(config-cfs-region)# no ntp
The following example shows how to remove all the applications from a region.
switch(config)# no cfs region 1
WARNING: All applications in the region wiil be moved to default region.
Are you sure? (y/n) [n] y
Related Commands Command Description
show cfs regions Displays all configured applications with peers.
To Next Page
Loading...
