Send documentation comments to mdsfeedback-doc@cisco.com
4-143
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 4 C Commands
crypto transform-set domain ipsec
Examples The following example shows how to configure an IPsec transform set.
switch# config terminal
switch(config)# crypto transform-set domain ipsec Set1 esp-aes 128
Related Commands Command Description
clear crypto sa domain ipsec Clears security associations.
crypto ipsec enable Enables IPsec.
show crypto transform-set
domain ipsec
Displays IPsec crypto transform set information.
To Next Page
Loading...
