Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
6-9
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 6 Debug Commands
debug cert-enroll
debug cert-enroll
To enable debugging for the certificate enroll daemon, use the debug cert-enroll command in EXEC
mode. To disable a debug command use the no form of the command or use the no debug all command
to turn off all debugging.
debug cert-enroll {all | config | config-lowlevel | request | request-lowlevel}
no debug cert-enroll {all | config | config-lowlevel | request | request-lowlevel}
Syntax Description
Defaults Disabled.
Command Modes EXEC mode.
Command History
Usage Guidelines None.
Examples The following example displays the system output when the debug cert-enroll all command is issued:
switch# debug cert-enroll all
2006 Jan 21 00:44:52.875125 cert_enroll: cert_en_debug_conf_open: entering...
2006 Jan 21 00:44:52.875602 cert_enroll: cert_en_debug_conf_open: exiting
2006 Jan 21 00:44:52.876284 cert_enroll: cert_en_conf_close: entering...
2006 Jan 21 00:44:52.876349 cert_enroll: cert_en_conf_close: returning 0
2006 Jan 21 00:44:52.876400 cert_enroll: cert_en_enable_info_config: entering for
Cert-enroll Daemon debug
2006 Jan 21 00:44:52.876428 cert_enroll: cert_en_debug_conf_open: entering...
2006 Jan 21 00:44:52.876679 cert_enroll: cert_en_debug_conf_open: exiting
sw-46-180# 2006 Jan 21 00:44:52.876712 cert_enroll: cert_en_enable_info_config:
SET_REQ for Cert-enroll Daemon debug with 1
2006 Jan 21 00:44:52.876857 cert_enroll: cert_en_enable_info_config: SET_REQ done for
Cert-enroll Daemon debug with 1
2006 Jan 21 00:44:52.876896 cert_enroll: cert_en_enable_info_config: got back the return
value of configuration operation:success
2006 Jan 21 00:44:52.876922 cert_enroll: cert_en_debug_conf_close: entering...
2006 Jan 21 00:44:52.876965 cert_enroll: cert_en_debug_conf_close: returning 0
2006 Jan 21 00:44:52.876991 cert_enroll: cert_en_enable_info_config: exiting for
Cert-enroll Daemon debug...
all Enables all debugging flags.
config Enables debugging for the certificate enroll configuration.
config-lowlevel Enables low-level debugging for the certificate enroll configuration
request Enables debugging for the certification enroll request.
request-lowlevel Enables low-level debugging for the certification enroll request.
Release Modification
3.0(1) This command was introduced.