Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
xxxix
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
New and Changed Information
Updated the following commands to indicate
they are not supported on the Cisco Fabric
Switch for HP c-Class BladeSystem and Cisco
Fabric Switch for IBM BladeCenter:
cloud-discovery enable command
crypto ike enable command
crypto ipsec enable command
fcc enable command
ficon enable
fcip enable command
fcrxbbcredit extended enable command
fc-tunnel command
iscsi enable command
ivr enable command
san-ext-tuner enable command
zone broadcast enable vsan command
C Commands
F Commands
C Commands
I Commands
S Commands
Z Commands
SAN Device Virtualization clear sdv command C Commands
debug sdv command Debug Commands
device-alias (SDV virtual device
configuration submode) command
D Commands
link (SDV virtual device configuration
submode) command
L Commands
pwwn (SDV virtual device configuration
submode) command
P Commands
sdv abort vsan command S Commands
show sdv command Show Commands
virtual-domain (SDV virtual device
configuration submode) command
virtual-fcid (SDV virtual device
configuration submode) command
V Commands
SNMP link-state-trap command L Commands
SANTap show santap module command
(tech-support option)
Show Commands
FCS fcs virtual-device-add command F Commands
Network Time Protocol ntp sync-retry command N Commands
Daylight Saving Time clock command (updated example for setting
the summer-time option)
C Commands
New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued)
Feature Description Where Documented