Send documentation comments to mdsfeedback-doc@cisco.com
7-5
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 7 E Commands
end
end
To exit any of the configuration modes and return to EXEC mode, use the end command in configuration
mode.
end
Syntax Description This command has no arguments or keywords.
Defaults None.
Command Modes Configuration mode.
Command History
Usage Guidelines You can also press Ctrl-Z to exit configuration mode.
Examples The following example changes the name to george. Entering the end command causes the system to
exit configuration mode and return to EXEC mode.
switch(config)# hostname george
george(config)# end
switch#
Related Commands
Release Modification
1.0(2) This command was introduced.
Command Description
exit Exits configuration mode, or any of the configuration modes.
To Next Page
Loading...
Need help?
General