Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
8-8
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
fabric-binding database vsan
Examples The following example enters the fabric binding database submode and adds the sWWN and domain ID
of a switch to the configured database list.
switch# config terminal
switch(config)# fabric-binding database vsan 5
switch(config-fabric-binding)# swwn 21:00:05:30:23:11:11:11 domain 102
The following example deletes a fabric binding database for the specified VSAN.
switch# config terminal
switch(config)# no fabric-binding database vsan 10
The following example deletes the sWWN and domain ID of a switch from the configured database list.
switch# config terminal
switch(config)# fabric-binding database vsan 5
switch(config-fabric-binding)# no swwn 21:00:15:30:23:1a:11:03 domain 101
Related Commands Command Description
fabric-binding activate Activates fabric-binding.
fabric-binding enable Enables fabric-binding.