Send documentation comments to mdsfeedback-doc@cisco.com
8-67
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 8 F Commands
ficon slot assign port-numbers
swich# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# ficon slot 3 assign port-numbers 0-15, 48-63
The following example reserves FICON port numbers 0 through 15 for the first 16 interfaces and 0
through 15 for the second 32 interfaces in slot 3.
switch(config)# ficon slot 3 assign port-numbers 0-15, 0-15
The following example changes the reserved FICON port numbers for up to 24 interfaces in slot 3.
switch(config)# ficon slot 3 assign port-numbers 0-15, 56-63
The following example releases the port numbers.
switch(config)# no ficon slot 3 assign port-numbers 0-15, 56-63
The following example shows the switch output when there are duplicate port numbers.
switch(config)
switch(config)# no ficon slot 1 assign port-numbers
switch(config)# ficon slot 1 assign port-numbers 0-14, 0
WARNING: fc1/16 and fc1/1 have duplicated port-number 0 in port VSAN 99
Related Commands Command Description
show ficon Displays configured FICON details.
To Next Page
Loading...
