CHAPTER
Send documentation comments to mdsfeedback-doc@cisco.com
10-1
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
10
H Commands
The commands in this chapter apply to the Cisco MDS 9000 Family of multilayer directors and fabric
switches. All commands are shown here in alphabetical order regardless of command mode. See the
“About the CLI Command Modes” section on page 1-3 to determine the appropriate mode for each
command. For more information, refer to the Cisco MDS 9000 Family CLI Configuration Guide.
To Next Page
Loading...
