Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
11-8
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
install all
Module Image Running-Version New-Version Upg-Required
------ ---------- -------------------- -------------------- ------------
1 slc 1.3(2a) 1.3(1) yes
1 bios v1.1.0(10/24/03) v1.1.0(10/24/03) no
2 ips 1.3(2a) 1.3(1) yes
2 bios v1.1.0(10/24/03) v1.1.0(10/24/03) no
3 ips 1.3(2a) 1.3(1) yes
3 bios v1.1.0(10/24/03) v1.1.0(10/24/03) no
4 slc 1.3(2a) 1.3(1) yes
4 bios v1.1.0(10/24/03) v1.1.0(10/24/03) no
5 system 1.3(2a) 1.3(1) yes
5 kickstart 1.3(2a) 1.3(1) yes
5 bios v1.1.0(10/24/03) v1.1.0(10/24/03) no
5 loader 1.2(2) 1.2(2) no
6 system 1.3(2a) 1.3(1) yes
6 kickstart 1.3(2a) 1.3(1) yes
6 bios v1.1.0(10/24/03) v1.1.0(10/24/03) no
6 loader 1.2(2) 1.2(2) no
Do you want to continue with the installation (y/n)? [n] y
Install is in progress, please wait.
Syncing image bootflash:/boot-1.3.1 to standby.
[####################] 100% -- SUCCESS
Syncing image bootflash:/isan-1.3.1 to standby.
[####################] 100% -- SUCCESS
Jan 18 23:40:03 Hacienda %VSHD-5-VSHD_SYSLOG_CONFIG_I: Configuring console from
Performing configuration copy.
[####################] 100% -- SUCCESS
Module 6: Waiting for module online.
|
Auto booting bootflash:/boot-1.3.1 bootflash:/isan-1.3.1...
Booting kickstart image: bootflash:/boot-1.3.1....
.....................................Image verification OK
Starting kernel...
INIT: version 2.78 booting
Checking all filesystems..r.r.. done.
Loading system software
Uncompressing system image: bootflash:/isan-1.3.1
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCC
INIT: Entering runlevel: 3
The following example displays the file output continuation of the install all command on
the console of the standby supervisor module.
Hacienda(standby)#
Auto booting bootflash:/boot-1.3.1 bootflash:/isan-1.3.1...
Booting kickstart image: bootflash:/boot-1.3.1....
.....................................Image verification OK
Starting kernel...
INIT: version 2.78 booting
Checking all filesystems..r.r.. done.
Loading system software
Uncompressing system image: bootflash:/isan-1.3.1
CCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCCC
CCCCCCCCCCCCCCCCCCCCCCCC