Send documentation comments to mdsfeedback-doc@cisco.com
lxi
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
New and Changed Information
IVR clear ivr service-group database command C Commands
ivr copy active-service-group
user-configured-service-group command
ivr copy active-topology
user-configured-topology command
ivr copy active-zoneset full-zoneset command
ivr service-group activate command
ivr zone rename command
ivr zoneset rename command
I Commands
show ivr service-group command
show ivr virtual-fcdomain-add-status2
command
Show Commands
Lossless InOrder Delivery
(IOD)
debug rib command (liod_error, liod_event,
and liod_trace options)
Debug Commands
McData Interoperability
Support
show wwn command (vsan-wwn option) Show Commands
vsan database command (increased the interop
mode range to 4)
V Commands
wwn vsan command W Commands
Message logging logging timestamp command L Commands
N-port identifier
virtualization (NPIV)
npiv enable command N Commands
Onboard Failure Logging
(OBFL)
clear logging command (onboard, module
and session, options)
C Commands
hw-module logging onboard command H Commands
show logging command (onboard logging) Show Commands
Online Health Management
System
system health (Configuration mode)
command (frame-length and auto options to
the loopback keyword)
system health external-loopback command
(source and destination keywords and the
frame-count and frame-length options
system health internal-loopback command
(frame-count and frame-length options)
system health module command (Added note
about frequency range for bootflash)
system health serdes-loopback command
S Commands
SAN tuner extension tape-bkgrp command
tape-volgrp command
T Commands
New and Changed Commands in the Cisco MDS 9000 Family Command Reference (continued)
Feature Description Where Documented
To Next Page
Loading...
