Send documentation comments to mdsfeedback-doc@cisco.com
11-21
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
interface
Usage Guidelines You can specify a range of interfaces by issuing a command with the following example format:
interface fc1/1 - 5 , fc2/5 - 7
The spaces are required before and after the dash ( - ) and before and after the comma ( , ).
Examples The following example selects the mgmt 0 interface and enters interface configuration submode.
switch# config terminal
switch(config)# interface mgmt 0
Related Commands Command Description
show interface Displays an interface configuration for a specified interface.
To Next Page
Loading...
