Send documentation comments to mdsfeedback-doc@cisco.com
11-26
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
interface fc-tunnel
The following example enables traffic flow through this interface.
switch(config-if)# no shutdown
The following example references the configured path in the source switch (switch S).
switch# config t
switch(config)# interface fc-tunnel 100
switch(config)# explicit-path Path1
Related Commands Command Description
show interface fc-tunnel Displays an FC tunnel interface configuration for a specified interface.
fc-tunnel explicit-path Configures a new or existing next-hop path.
To Next Page
Loading...
Need help?
General