Send documentation comments to mdsfeedback-doc@cisco.com
11-29
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
interface fcip
Examples The following example selects an FCIP interface and enters interface configuration submode.
switch# config terminal
Enter configuration commands, one per line. End with CNTL/Z.
switch(config)# interface fcip 1
switch(config-if)#
The following example assigns the FICON port number to the selected FCIP interface.
switch# config terminal
switch(config)# interface fcip 51
switch(config-if)# ficon portnumber 234
Related Commands Command Description
show interface fcip Displays an interface configuration for a specified FCIP interface.
To Next Page
Loading...
