Cisco mds 9124 - fabric switch

Send documentation comments to mdsfeedback-doc@cisco.com
11-33
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
interface iscsi
The following example enables the store-and-forward mode for iSCSI interfaces 9/1 to 9/4.
switch(config)# interface iscsi 9/1 - 4
switch(config-if)# mode store-and-forward
The following example reverts to using the default pass-thru mode for iSCSI interface 9/1.
switch(config)# interface iscsi 9/1
switch(config-if)# mode pass-thru
Related Commands Command Description
iscsi enable Enables iSCSI.
show interface Displays an interface configuration for a specified interface.