Send documentation comments to mdsfeedback-doc@cisco.com
11-36
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
interface port-channel
Command History
Usage Guidelines Refer to the Cisco MDS 9000 Family CLI Configuration Guide for information on port number
allocation.
Examples The following example enters configuration mode and configures a PortChannel interface.
switch# config terminal
switch(config)# interface port-channel 32
switch(config-if)#
The following example assigns the FICON port number to the selected PortChannel port.
switch# config terminal
switch(config)# interface Port-channel 1
switch(config-if)# ficon portnumber 234
Related Commands
Release Modification
1.0(2) This command was introduced.
1.3(1) Added channel mode active subcommand.
Command Description
show interface Displays interface configuration for specified interface.
To Next Page
Loading...
Need help?
General