Send documentation comments to mdsfeedback-doc@cisco.com
11-69
Cisco MDS 9000 Family Command Reference
OL-16217-01, Cisco MDS SAN-OS Release 3.x
Chapter 11 I Commands
ips netsim reorder
The following example shows reordering of every 50th packet with a distance limit of 5.
switch# config terminal
switch(config)#
switch(config)# san-ext-tuner enable
switch(config)# exit
switch#
switch# ips netsim reorder nth 50 distance 5 ingress gigabitethernet 2/3
Related Commands Command Description
show ips netsim Displays a summary of the interfaces that are currently operating in network
simulation mode.
ips netsim enable Enables the IP Network Simulator.
To Next Page
Loading...
Need help?
General